37
TTB579PLN
by TITAN
Trouble shooting
In
more
detail…
GB
IE
Problem
Possible cause
Solution
3. The motor cuts
out whilst under
no load
3.1 Mains failure
3.2 Motor has exceeded
its duty cycle
3.3 Faulty motor
3.4 Faulty On/Off switch
3.1 Check the supply
3.2 Allow the motor to
cool and reset the
overload
3.3 Check and replace if
necessary
3.4 Check and replace if
necessary
4. The motor cuts
out whilst under
load
4.1 Motor has exceeded
its duty cycle and the
overload has cut in
4.2 Cutting depth is too
great so the overload
has cut in
4.3 Feed rate is too fast
so the overload has
cut in
4.4 Dull cutter blades so
the overload has cut
in
4.1 Allow the motor to
cool and reset the
overload
4.2 Allow the motor to
cool and reset the
overload. Reduce the
cutting depth
4.3 Allow the motor to
cool and reset the
overload;
Reduce the feed rate
4.4 Replace or sharpen
the blades, allow the
motor to cool and
reset the overload
5. Poor finish on
workpiece
5.1 Dull or damaged
blades
5.2 Uneven feed rate
5.3 Feed rate too fast
5.1 Replace or sharpen
the blades
5.2 Ensure constant
pressure on the
workpiece whilst
planing
5.3 Reduce the speed of
feed
6. Extraction port
becomes blocked
whilst thicknessing
(without external
extraction)
6.1 Cutting depth too
great
6.2 Wood is too damp
6.1 Reduce the cutting
depth
6.2 Allow the wood to dry
