POLE HEDGE TRIMMER 400W TTB427GTM
TROUBLESHOOTING
WARNING!
Only perform the steps described in these instructions! All further inspection,
maintenance and repair work must be performed by a qualified specialist! Contact a
specialist if the problem cannot be solved by yourself!
WARNING!
Only perform the steps described within these instructions! All further
inspection, maintenance and repair work must be performed by an authorised service centre
or a similarly qualified person if you cannot solve the problem yourself!
Problem
Possible cause
Fault correction
Product does not start
Not connected to power supply Connect to power supply
Power cord or plug is defective Check by a specialist electrician
Other electrical defect to the
product
Check by a specialist electrician
Product does not reach full
power
Extension cord not suitable for
operation with this product
Use a suitable extension cord
Power source (e.g. generator)
has too low a voltage
Connect to another power source
Air vents are blocked
Clean the air vents
Unsatisfactory result
Blade is worn
Have it replaced with a new one
Thickness of branches exceeds
capacity
Only cut branches within the limits
Excessive vibration/noise or
exhaust
Blade is dull/damaged
Replace with a new one
Bolts/nuts are loosen
Tighten bolts/nuts
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for recycling
advice.
For further information visit www.recycle-more.co.uk.
400w 高枝.indd 23
12-3-2 上午11:36
Summary of Contents for TTB427GTM
Page 26: ...400w indd 26 12 3 2 11 36...
