Titan TTB427GTM, Safety And Operating Manual, Page: 24 / 26

POLE HEDGE TRIMMER 400W TTB427GTM
UK PLUG REPLACEMENT
The fuse in the main plug of your garden power tool should always be replaced with one of
identical rating.
Check the voltage given on your garden power tool matches the supply voltage.
The garden power tool is supplied with a fitted plug, however if you should need to fit a new
plug follows the instruction below.
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue – Neutral
Brown – Live
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with N.
The wire which is coloured
brown
must be connected to the terminal, which is marked with
the letter
L.
Warning: Never connect live or netutral wires to the earth terminal of the plug.
A 13 AMP plug (approved by BS1363/A) must be used and a 5 AMP fuse must be fitted.
NOTE: If a moulded plug is fitted and has to be removed take great care in disposing of the
plug and severed cable, it must be destroyed to prevent engaging into a socket. If the supply
cord is damaged it must be replaced by a service agent or a similarly qualified person in
order to avoid hazard.
5AMP fuse
Brown L(Live)
Cable grip Outer
sleeve
Blue to
N(Neutral)
400w 高枝.indd 24 12-3-2 上午11:36