POLE HEDGE TRIMMER 400W TTB427GTM
MAINTENANCE
WARNING!
Before carrying out any repairs or servicing
work, you must ensure that the pole hedge trimmer has
been disconnected from the power supply. Repairs and
maintenance work other than described within this
instruction manual may be performed only by qualified specialist!
1. SERVICE
To ensure long and reliable service, carry out the following
maintenance regularly. Servicing and cleaning work on the pruner
and the removal of the guards may only be carried out after the
motor has been switched off and the plug disconnected from the
power supply.
1). Keep the product clean. Remove debris from it after each use and
before storage.
2). Regularly check for obvious defects such as loose, dislodged or
damaged blade, loose fixings and worn or damaged components.
3). Clean the product with a dry cloth. Use a brush for areas that are
hard to reach.
4). In particular clean the air vents after every use with a cloth and
brush.
5). Clean the pole hedge trimmer with a brush or cloth. Do not use
any solvents or water to remove dirt. Remove stubborn dirt with high
pressure air (max. 3 bar).
6). Do not clean the pole hedge trimmer while it is running.
7). Ensure that all the fastening elements (screws, nuts, etc.) are tight
at all times so that you can safely work with the pole hedge trimmer.
8). Check the pole hedge trimmer frequently for signs of wear.
Replace worn or damaged parts.
9). Store your pole hedge trimmer in a dry place. To ensure a long
service life all screw parts should be cleaned and then oiled.
10). The component that is subject to most wear is the cutting blade.
You should therefore check the condition of the cutting blade and its
mounting at regular intervals.
- If the cutting blade is worn or blunt it must be replaced immediately;
- If the pole hedge trimmer starts to suffer from excessive vibrations,
this means that the cutting blade has suffered deformation due to
impacts. In this case it must be repaired or replaced.
400w 高枝.indd 21
12-3-2 上午11:36
Summary of Contents for TTB427GTM
Page 26: ...400w indd 26 12 3 2 11 36...
