background image

POLE PRUNER 750W  TTB426GDO

7.   Use the garden power tool, accessories and tool bits etc. in accordance 

with these instructions, taking into account the working conditions and the 

work to be performed.

 Use of the garden power tool for operations different from 

those intended could result in a hazardous situation.

PRUNER SAFETY INSTRUCTIONS

1.   Interrupt your work when you feel tired or exhausted. Make regular breaks 

to regenerate. 

A moment of inattention while operating the garden power tool may 

result in serious personal injury.

2.   Keep all parts of the body away from the saw chain. Do not remove cut 

material or hold material to be cut when saw chain is moving. Make sure 

the switch is off when clearing jammed material. 

A moment of inattention while 

operating the garden power tool may result in serious personal injury.

3.   Hold the garden power tool by insulated gripping surfaces only, because the 

saw chain may contact hidden wiring or its own cord. 

Saw chains contacting a 

"live" wire may make exposed metal parts of the garden power tool "live" and could 

give the operator an electric shock.

4.   Keep cable away from cutting area.

 During operation the cable may be hidden in 

shrubs and can be accidentally cut by the blade.

5.   Keep all parts of the body away from the saw chain when the garden power 

tool is operating. Before you start the garden power tool, make sure the saw 

chain is not contacting anything. 

A moment of inattention while operating garden 

power tools may cause entanglement of your clothing or body with the saw chain.

6.   Always hold the garden power tool with both hands on the handle and soft 

grip.

 Holding the garden power tool with only one hand or on parts not intended for 

that increases the risk of personal injury and should never be done.

7.   Wear safety glasses and hearing protection. Further protective equipment 

for head, hands, legs and feet is recommended.

 Adequate protective clothing 

will reduce personal injury by flying debris or accidental contact with the saw chain.

8.   Do not operate a garden power tool in a tree. 

Operation of a garden power tool 

while up in a tree may result in personal injury.

9.   Always keep proper footing and operate the garden power tool only when 

standing on fixed, secure and level surface.

 Slippery or unstable surfaces such 

as ladders may cause a loss of balance or control of the garden power tool.

10. When cutting a limb that is under tension be alert for spring back. 

When the 

tension in the wood fibres is released the spring loaded limb may strike the operator 

and/or throw the garden power tool out of control.

11. Use extreme caution when cutting brush and saplings. 

The slender material 

may catch the saw chain and be whipped toward you or pull you off balance.

12. Carry the garden power tool by the soft grip with the garden power tool 

switched off and away from your body. When transporting or storing the 

garden power tool always fit the guide bar cover. 

Proper handling of the garden 

power tool will reduce the likelihood of accidental contact with the moving saw chain.

Service

Have your garden power tool serviced by a qualified repair person using only 

identical replacement parts. 

This will ensure that the safety of the garden power tool is 

maintained.

Summary of Contents for TTB426GDO

































Reviews: