UK PLUG REPLACEMENT
The fuse in the main plug of your garden power tool should
always be replaced with one of identical rating.
Check the voltage given on your garden power tool matches
the supply voltage.The garden power tool is supplied with
a fitted plug, however if you should need to fit a new plug
follows the instruction below.
IMPORTANT:
The wires in the mains lead are coloured in accordance with
the following code:
Blue – Neutral
Brown – Live.
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured
blue
must be connected to the
terminal which is marked with
N.
The wire which is coloured
brown
, must be connected to
the terminal, which is marked with the letter
L.
Warning:
Never connect live or netutral wires to the earth
terminal of the plug. A 13AMP (BS1363/A) plug must be
used and a 13AMP fuse must be fitted.
NOTE:
If a moulded plug is fitted and has to be removed
take great care in disposing of the plug and severed cable,
it must be destroyed to prevent engaging into a socket. If
the supply cord is damaged it must be replaced by a service
agent or a similarly qualiaed person in order to avoid hazard
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your Local Authority or
retailer for recycling advice.
For further information visit www.recycle-more.
co.uk.
13
Summary of Contents for TTB426GDO
Page 27: ...POLE PRUNER 750W TTB426GDO...
Page 30: ......
Page 31: ...POLE PRUNER 750W TTB426GDO...
Page 32: ...8458 4308012 011...
