Titan TTB426GDO, Operating Manual, Page: 21 / 32

POLE PRUNER 750W TTB426GDO
2). CUT THICK BRANCHES
When cutting larger branches, three cuts are necessary as
shown below:
a). First cut into the branch from below, outside of the
location where you intend to cut off the branch. The cut
should go one third to halfway through the branch. (See
Fig.14a)
b). Cut into the branch from the top, outside from where the
branch is to be sawn. (See Fig.14b)
c). Last, cut off the stump with one clean cut from top to
bottom. You might want to seal the cut with a suitable
compound. (See Fig.14c)
Fig. 14a
Fig. 14b
Fig. 14c