English
© Titan Tool Inc. All rights reserved.
7
Main Screen
SET PSI
3000
ACTUAL PSI
2950
The Main Screen is the default screen
for the control system at sprayer startup.
Pressing the #2 key switches between PSI and MPa units of measure.
Press the #1 key to scroll through the remaining menu screens.
Gallons Pumped Screen
GALLONS PUMPED
SELECT-4
MENU-1
The Gallons Pumped screen shows the
total number of gallons or liters sprayed
by the sprayer.
GALLONS XXXXXX
PRESS 1 FOR MENU
To select the Volume Pumped screen,
press the #4 key.
Job Gallons Screen
JOB GALLONS
SELECT-4
MENU-1
The Job Gallons screen allows the user
to reset a gallon counter to track usage
on specific jobs.
JOB GALLONS
XXXX
MENU-1
RESET-3
To select the Job Volume screen, press
the #4 key.
unit Serial # Screen
UNIT SERIAL #
SELECT-4
MENU-1
The Unit Serial # screen shows the
sprayers serial number.
SER # XXXXXXXXXX
PRESS 1 FOR MENU
To select the Unit Serial # screen, press
the #4 key.
Timers Screen
TIMERS
SELECT-4
MENU-1
The Timers screen shows the total time
the sprayer has been turned on as well
as the total time the sprayer has been running (pumping).
ON TIME XXXXX:XX
RUN TIME XXXX:XX
To select the Timers screen, press the
#4 key.
Job Timers Screen
JOB TIMERS
SELECT-4
MENU-1
The Job Timers screen allows the user
to reset the “ON TIME” and “RUN TIME”
to track time on specific jobs.
ON TIME XXXXX:XX
RUN TIME XXXX:XX
To select the Job TImers screen, press
the #4 key. The screen will toggle
between the timers and a screen that allows the user to reset the
timers.
Service Time Screen
SERVICE TIME
SELECT-4
MENU-1
The Service Time screen allows the user
to set a service time interval (in hours).
Below the set time, the screens shows the current amount of
hours on the sprayer. To select the Service Timer screen, press
the #4 key.
SERVICE @ XXXHR
RUN HOURS XX
The screen will toggle between the
service hours and a screen that allows
the user to change the service time interval.
When the service time interval is set and met by the run hours,
the display will toggle between the “Main screen” and a “Service
Required” screen at sprayer startup. To stop the toggling, scroll
to the “Service Time” screen and either set a new service time
interval or set the service time to “0”.
Pressure Screen
PRESSURE
SELECT-4
MENU-1
The Pressure screen allows the user to
see the current set point pressure as
well as the actual working pressure.
SET PSI
3000
ACTUAL PSI
2950
To select the Pressure screen, press
the #4 key. This screen is also the Main
Screen.
Security code Screen
SECURITY CODE
CHANGE-2
MENU-1
The Security Code screen allows the
user to set a four digit security code
to prevent unauthorized use of the sprayer. If a security code
has been set, the control system display will ask for the code at
startup. If the correct code is entered, the display will show the
Main Screen and the sprayer will operate. If the wrong code is
entered, the display will continue to ask for the correct code and
the sprayer will be disabled. To set or change the security code,
press the #2 key.
NOTE: If the sprayer is new, no security code is set and
the Main Screen will appear at startup. also,
when setting a security code for the first time,
the “Enter Old code Number” screen will not
appear.
ENTER OLD CODE
NUMBER
Enter the old security code number to
access the screen that allows the code
change. If the wrong code is entered, the display will continue to
ask for the correct code and the security code cannot be changed.
ENTER NEW CODE
NUMBER
Enter the new security code. Once the
new code is entered, the display will
automatically ask that the new code be re-entered for verification.
If the same new code is re-entered, the display will confirm that
the new code has been accepted and return to the Main Screen.
If the new code is re-entered incorrectly, the display will return to
the “Enter New Code Number” screen and the process will repeat.
NOTE: To inactivate the anti-Theft Digital Lockout
security function, enter “1111” at the “Enter New
code Number” screen (this is the default code
that leaves the sprayer unlocked). as a result,
the Main Screen will appear at sprayer startup.
Prime Screen
PRIME
The Prime screen appears when the
pressure control knob is set at the “MIN”
setting.
Rapid clean Screen
RAPID CLEAN
ACTUAL PSI
XXXX
The Rapid Clean screen appears when
the pressure control knob is set at the
RAPID CLEAN position and the PRIME/SPRAY valve is in the
PRIME position.
NOTE: If there is no action at any menu screen for 30
seconds, the display will go back to the Main
Screen.
