30
Smart valve positioner
TS800/TS805 Series
tissin
5.2 Wiring diagram
5.2.1 Power and feedback signal connection
5.2.2 Limit switch connection
Mechanical type
Proximity type
5.2.3 Alarm signal connection
The alarm module is built in to all products. According to the requirements of the site, you can
get the feedback from the emergency alarm signal by wiring as follow.
The alarm circuit is OFF when the system is
operating normally.
The alarm circuit turns ON according to the
set values as below.
When the product has seriously problems
(If priority value of Error code is “0”)
When there is a potential problem
(If priority value of Error code is “1”)
When the valve is fully open
When the valve is fully close
For the setting method refer to page 47
<
AL1 NONE
> and<
AL2 NONE
>.
