Telephoning with the tiptel 85 System
38
Dialling with automatic outside line access
If in the telephone system for the system telephone function "Automatic outside
line access" has been activated, on each line access you will immediately get an
outside line. Telephone numbers dialled in this case will always be sent to the
public switchboard and result in the requested connection set up.
If a s an exception you wish to call an internal subscriber there are two options:
o
In front of the extension number you put two "#" (e.g. "##22").
You press the
Internal key
and then dial the extension. The
Internal key
may also
be programmed to a function key (see also „Configuration options are as in
Suppress number
.
o
“, S.82)
If with most of your calls you wish to transfer them within your telephone
system it is strongly recommended for ease of use not to use automatic
outside line access.
Keypad
You must choose between the following settings variations:
Keypad dialling as standard dialling mode
The tiptel 85 System dialling mode can be permanently switched from normal dial
information (standard) to keypad.
To make the switch, in
Main menu
Settings
Phone,
configure the
Permanent
keypad dial
in the
Dialling method
option.
Only use these settings, if your system administrator asks you to. The
permanent keypad dialling is designed for specific applications. In normal use
with a Tiptel telephone system, not all functions will be available to you under
these circumstances.
Single event dialling with keypad
You can press the
keypad dialling
SELECTION KEY
at any time in preset mode
whilst you are entering the number.
Summary of Contents for 85 System S0
Page 2: ......
Page 9: ...Operating elements 9 Controls and connectors Top ...
Page 114: ......
Page 115: ......