Settings
73
Please note, especially when using the system’s LCR function, that some
telephone providers do not support the X.75 protocol used during the firmware
update. In this instance, the LCR function must be deactivated during the
update.
In case your telephone system is being operated at more than one point to
multipoint accesses this may cause problems in synchronisation. This may
result in interruptions of data transfer and lead to a cancellation of the firmware
update. In such a case your system administrator should activate layer 2 at
port 1 permanently.
ISDN – time transfer
If the
ISDN-time transfer
line is activated (
On
), the date and time will be updated with
every external call via the ISDN line. If you do not want this data to be transferred,
switch the function to
Off
.
Language settings
Main menu
Settings
Phone
Language settings
This menu provides you with a list of the possible language settings for your device.
You can select the language you require.
If you cannot read or understand the language, you can go directly to the
Language
settings
menu when the telephone is in standby mode, by entering 999.
Reset device
Main menu
Settings
Phone
Reset device
To reset the tiptel 85 System to its factory default settings, select the "Reset device"
option. You will then be asked to enter your PIN. Confirm this by pressing
OK.
You will be asked if you want to delete the local telephone book.
Reset device
Delete local phone book?
Yes ....................................
No .....................................
Phone
Summary of Contents for 85 System S0
Page 2: ......
Page 9: ...Operating elements 9 Controls and connectors Top ...
Page 114: ......
Page 115: ......