TIPTEL 106 VoIP, Installation Instructions Manual

Page: 29 / 36

Installation
11
Connecting for operation mode switch
This operating mode is designed to make your present analog telephone and your
analog telephone wall socket VoIP-compatible without having to use a PBX.
Please connect the attached RJ11-RJ11 cable to the „LINE“ socket of the tiptel 106
VoIP. Please connect the other cable end to your analog wall socket.
Please connect your telephone to the “Phone” socket.
In this operation mode the tiptel 106 VoIP serves as switch between the VoIP-CO-line
and the analog CO-line.
Note: If you dispose of a PBX-system with analog CO-line, you can connect
this instead of the telephone.