Set the device installed community No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
Floor No.
Set the device installed floor No.
No.
If you select outer door station as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Set Linked Network Settings
Click Configuration → Video Intercom → Linked Network Settings .
You can set the device type, the SIP server's IP address, and the master station's IP address.
After setting the parameters, you can communicate among the access control device, door station,
indoor station, master station, and the platform.
Click Save to save the settings after the configuration.
7.5.10 Set Access Control and Authentication Parameters
Set the access control parameters and the authentication parameters.
Set Door Parameters
Click Configuration → Access Control → Door Parameters .
Figure 7-10 Door Parameters Settings Page
Click Save to save the settings after the configuration.
Door Contact
You can select Remain Open or Remain Closed according to your actual needs. By default, it is
Remain Closed.
Open Duration
49
ULtraFace 331 Face Recognition Terminal User Manual
Page 56 of 68
