Figure 7-3 Time Settings
Click Save to save the settings after the configuration.
Time Zone
Select the device located time zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device time should be synchronized manually. You can set the device time
manually or check Sync. with Computer Time to synchronize the device time with the
computer's time.
7.5.4 Set DST
Steps
1. Click Configuration → System → System Settings → DST .
Figure 7-4 DST Page
2. Check Enable DST.
3. Set the DST start time, end time and bias time.
4. Click Save to save the settings.
7.5.5 Upgrade and Maintenance
Reboot device, restore device parameters, and upgrade device version.
Reboot Device
Click Configuration → System → Maintenance → Upgrade & Maintenance .
43
ULtraFace 331 Face Recognition Terminal User Manual
Page 50 of 68
