Steps
1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings
page.
2. On the Communication Settings page, tap Wired Network.
Figure 6-6 Wired Network Settings
3. Set DHCP, IP Address, Subnet Mask, or Gateway.
Note
The device's IP address and the computer IP address should be in the same IP segment.
6.5.2 Set Wi-Fi Parameters
You can enable the Wi-Fi function and set the Wi-Fi related parameters.
Steps
Note
The function should be supported by the device.
1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings
page.
2. On the Communication Settings page, tap.
18
ULtraFace 331 Face Recognition Terminal User Manual
Page 25 of 68
