Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Attendance Mode as Manual.
Figure 6-14 Manual Attendance Mode
3. Enable the Attendance Status function.
Result
You should select the attendance status manually after authentication.
Note
If you do not select a status, the authentication will be failed and it will not be marked as a valid
attendance.
6.12.3 Set Auto Attendance via Device
Set the attendance mode as auto, and you can set the attendance status and its available schedule.
The system will automatically change the attendance status according to the configured
parameters.
Before You Start
Add at least one user, and set the user's authentication mode. For details, see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Attendance Mode as Auto.
32
ULtraFace 331 Face Recognition Terminal User Manual
Page 39 of 68
