Chapter 6 Basic Operation
6.1 Select Language
You can select a language for the device system.
After the device activation, you can select a language for the device system.
By default, the system language is English.
6.2 Set Application Mode
After activating the device, you should select an application mode for better device application.
Steps
1. On the Welcome page, select Indoor or Others from the drop-down list.
Figure 6-1 Welcome Page
2. Tap OK to save.
Note
• You can also change the settings in System Settings.
• If you install the device indoors near the window or the face recognition function is not
working well, select Others.
• If you do not configure the application mode and tap Next, the system will select Indoor by
default.
• If you activate the device via other tools remotely, the system will select Indoor as the
application mode by default.
13
ULtraFace 331 Face Recognition Terminal User Manual
Page 20 of 68
