Timberland VD33, Instruction Manual

Page: 2 / 12

DISPLAY AND CROWN / BUTTON OPERATION
Dual Time Hour
Hand (12hr)
Second Hand
Dual Time
Minute Hand
Date Window 24 Hour Hand
Minute Hand
2nd click
1st click
Crown at
normal position
Button A
Button B
Hour Hand
VD33
Dual Time Hour
Hand (12hr)
Second Hand
Dual Time
Minute Hand
24 Hour Hand
Minute Hand
1st click
Crown at
normal position
Button A
Button B
Hour Hand
VD34
ADJUSTING DUAL TIME HANDS POSITION
* After setting or changing the battery, before setting the time, check if the dual time hour hand and dual
time minute hand are at the "0" (12 o'clock) position.
* If either the dual time hour hand or the dual time minute hand is not at the "0" position, reset it / them
following the procedure shown below :
1) Pull out the crown to second click (VD33) / first click (VD34)
2) Keep the buttons A & B pressed at the same time for more than 2 seconds, then release the buttons.
* Dual time minute hand moves and returns to where it was
3) Press button A or B to reset the dual time hands to "0" position.
* Button A : dual time hour hand and dual time minute hand move counter-clockwise
Button B : dual time hour hand and dual time minute hand move clockwise
* The dual time hour hand moves correspondingly with the dual time minute hand
* The dual time hour hand and dual time minute hand move quickly if the respective buttons are kept
pressed.
4) Push the crown back in the normal position.
Note : The dual time minute hand rotates one revolution at every quarter (15 minutes). There is no
problem as it is typical function of the movement.
LOCAL TIME SETTING
1) Pull out the crown to second click (VD33) / first click (VD34) when the second hand is at the 12 o'clock
position.
2) Turn the crown to set the hour and minute hands. (make sure 24 hour hand is set correctly).
3) Push the crown back in the normal position in accordance with a time signal.
Note :
* The 24 hour hand moves correspondingly with the hour hand.
* The moment the date changes is midnight. When setting the hour hand, make sure that AM/PM is
correctly set by using the 24 hour hand as an AM/PM indicator.
DUAL TIME SETTING
* When moving to a country or area in a different time zone, adjust the dual time hour hand to that country
/ area :
[ Quick set the dual time ]
1) Crown at normal position.
2) Adjust the time by pressing the button A or B.
Button A : - 1 hour / push
Button B : +1 hour / push