TIGIEFFE AIRO R Series, Use And Maintenance Manual

Page: 55 / 114

Use and Maintenance Manual - R13 R17 Series Page 55
5.7. Socket (OPTIONAL) for electric tool connection and single-phase electric pump powering (OPTIONAL)
The platform is equipped with a socket (
A - optional ) (220230V
AC) enabling the operator to connect the electric tools
necessary to carry out his operations and to power the
(OPTIONAL) single-phase electric pump and with a
compressed air inlet (
D )”.
To activate the electric line (see picture aside) introduce a cable
into the plug ( A ) connected to the 230V AC. 50 Hz, provided
with all protections according to the current standards in force.
If there is the circuit breaker switch (optional), to activate the
electric line set the switch (B) to ON position. It is advisable to
check the earth-leakage circuit breaker by means of the
specially provided TEST button. Now socket ( C ) is powered
and can be used.
To activate the compressed air line, insert a tube connected to
the air system into the inlet ( D ). Now compressed air is
available in the platform inlet ( E ).
The plugs and sockets equipped on standard machines comply
with EEC standards and can therefore be used in EU member
countries.
On request the machine can be equipped with plugs and
sockets in compliance with local standards or with particular
needs.
Fig. 20
Connect to the power mains having the following features:

Power voltage 230V ± 10%

Frequency 50÷60 Hz

Activated grounding line.

Working protection devices according to current standards in force.

Do not use extension leads exceeding 5 metres to connect to the mains.

Use a cable of suitable section (min 3x2.5 mm
2
).

Do not use rolled-up cables.
5.8. Fuel level and re-fuelling
Before using the thermic propulsion check the fuel level in the tank.
This operation is to be carried out by visually checking the fuel level after unscrewing the filler cap.

Visually check the fuel level before starting to work.
 Keep the fuel tank and the motor clean