manualshive.com logo in svg

TIGIEFFE AIRO R Series, Use And Maintenance Manual

Share
Download
TIGIEFFE AIRO R Series Use And Maintenance Manual Download Page 54

      

 

Use and Maintenance Manual - R13    R17 Series 

Page 54 

 

 

WARNING: The emergency control can be stopped at any moment by releasing the knob or by stopping the 

pump.  

 

 

Once the emergency manoeuvre has been carried out, the knurled knobs must be set to their initial position 
again in order to resume the operations (in normal position the knobs are completely screwed). 

The  knurled  knobs  operating  the  outriggers  are  sealed;  to  carry  out  the  emergency  movement  of  the 

outriggers, remove the seal. 

 

 

WARNING! 

It is absolutely forbidden to operate the outriggers by means of emergency controls if  any operators are on 

the platform. The emergency control of the outriggers is allowed only with platform at ground and nobody and 

nothing on the platform. Risk of overturn. 

 

 

WARNING! 

It  is  absolutely  forbidden  to  operate  the  widening  and  narrowing  operations  of  the  tracks  (optional)  by 

emergency controls if any operators are on the platform. The emergency control of the outriggers is allowed 

only with platform at ground and nobody and nothing on the platform. Risk of overturn. 

 

Summary of Contents for AIRO R Series



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands