TIGIEFFE AIRO R Series, Use And Maintenance Manual

Page: 51 / 114

Use and Maintenance Manual - R13 R17 Series Page 51
5.5. Machine stop
5.5.1. Normal stop
In normal operating conditions:
 By releasing the controls the operation is stopped. Stop occurs within a time limit set in the factory, which guarantees
smooth braking.
 By releasing the dead-man pedal located on the platform, the operation is immediately stopped. In the event of an
immediate stop, braking is sudden.
5.5.2. Emergency stop button
Should it be necessary, the operator may immediately stop all machine functions from both platform and ground control station.
From the platform control station/wire control:
 press the emergency stop button on the control panel and the machine is turned off.
 By releasing the dead-man pedal, the operation is immediately stopped. In the event of an immediate stop, braking is
sudden.
On the ground control panel:

press the emergency stop button on the ground control panel and the machine and the heat motor will be turned off.
To resume the operations:
From the platform control station/wire control:

turn the emergency stop button of 1/4 turn clockwise;
On the ground control panel:

turn the emergency stop button of 1/4 turn clockwise;
5.5.3. Heat motor stop
In order to stop the heat motor:
From the platform control station/wire control:

Turn the starter key anticlockwise to position “0”.

Otherwise, press the emergency stop button.
On the ground control panel:

Turn the starter key anticlockwise to position “0”.

Otherwise, press the emergency stop button.
Do not stop the motor when the r.p.m. is high. Before stopping the motor wait until the r.p.m. is at the lowest.