Tiger JD5085-5115M T4F, Mounting And Operating Instructions

Page: 106 / 194

MAINTENANCE
TRIPLE FLAIL Maintenance Section 4-4
©2016 Alamo Group Inc.
MAINTENANCE
ITEM SERVICE COMMENTS
Knives Check Inspect for missing or damaged knives,
change as needed
Spindle mounting bolts Check 3/4” x 2” or 3/4” x 2-1/2” bolts
(spindle to deck) torque to 331 ft. lbs.
Knife mounting bolts Check Pre-lubricate threads, then torque to
knife to disk) 800 ft. lbs. Saber - Torque 1-3/4” knife bolts
to 2,000 ft. lbs.
Disk mounting bolts Check 5/8” x 1-3/4” or 5/8” x 2” bolts -
(disk to spindle) torque to 204 dry / 184 oiled ft. lbs.
Belts Check/Adjust Check if broken, tighten as required.
Main Frame and Deck Check Retorque bolts to torque specifications
in this section
Hydraulic Fluid Level Check Add if required per fluid recommendations
Rear Flail Drive (if applicable) Lubricate Grease as instructed in detailed
Bearing Flange and maintenance section
Shaft Coupler
Cutter Shaft Lubricate Grease as instructed in detailed
maintenance section
Ground Roller Bearings Lubricate Grease as instructed in detailed
maintenance section