Tico Pro-Spotter, Service Manual

Page: 102 / 211

6-10 Service Manual
TICO Manufacturing
FRONT AXLE & STEERING PRO-SPOTTER
Removal
See Figure 6-12.
NOTE
Procedure is written for the left side wheel bearing. Right
side wheel bearing procedure is similar.
Figure 6-12: Front Wheel Bearing Removal
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)

WARNING
2. Using an appropriate lifting device, raise the front
end of the tractor. (See “Use Lifting Equipment
Safely” on page 1-4.)
3. Support the tractor using jack stands. (See “Support
Tractor Securely” on page 1-3.)
4. Remove front wheels.
5. Remove drum.
6. Position a suitable container to receive the drained
oil.
7. Remove plug and drain oil.
8. Remove cap screws (1), washers (2), hub cover (3)
and gasket (4).
9. Remove counter nut (5), lock washer (6), and lock
ring (7).
10. Using an appropriate lifting device, remove
adjustment nut (8), outer wheel bearing (9), and hub
(11).
11. Remove sealer cup (15) and inner wheel bearing
(14).
12. Repair or replace components as necessary.
1 Cap Screw (6 used) 5 Counter Nut 9 Outer Wheel Bearing 13 Inner Bearing Cup
2 Washer (6 used) 6 Lock Washer 10 Outer Bearing Cup 14 Inner Wheel Bearing
3 Hub Cover 7 Lock Ring 11 Hub 15 Sealer Cup
4 Gasket 8 Adjustment Nut 12 Wheel Stud (10 used) 16 Stub Axle
1
TPS-166
2
3
5
6
7
8
9
10
11
12
13
14
15
16
4
• Prevent possible crushing injury or death.
Use appropriate lifting device.
• Support the tractor using properly rated jack
stands. Never work under a tractor supported
only by a jack.
• Do not use wood or concrete blocks to
support the tractor. Failure to properly
support the tractor may result in death or
serious injury.