Tico Pro-Spotter, Service Manual

Page: 153 / 211

PRO-SPOTTER BOOM AND FIFTH WHEEL
TICO Manufacturing
Service Manual 12-9
c. Pocket inserts are severely chipped, cracked, or
gouged.
Installation
See Figures 12-14 and 12-15.
Figure 12-14: Pocket Area
1. If pocket inserts (7) are dislodged, clean pocket
areas (9).
2. Apply double-face tape (8) to bottom of each pocket
area.
3. Install pocket inserts by pressing down firmly into
pocket areas.
Figure 12-15: Fifth Wheel Top Plate

CAUTION
4. Using an appropriate lifting device, install fifth wheel
top plate (1) onto mounting base (10).
5. Install bracket pins (4) through the fifth wheel top
plate and mounting base.
6. Install cap screws (2) and nuts (3). Tighten nuts to
specification.
Specification
Top Plate Vertical Movement—
Distance (maximum) 12.7 mm
0.5 in
7 Pocket Insert (2 used) 9 Pocket Area (2 used)
8 Double-Face Tape (as
necessary)
7
TPS-030
8
9
1 Fifth Wheel Top Plate 4 Bracket Pin (2 used)
2 Cap Screw (2 used) 10 Mounting Base
3 Nut (2 used)
Prevent possible crushing injury from heavy
component. Use appropriate lifting device.
Specification
Nut—Torque 68—81 N·m
50—60 ft·lb
3
TPS-029
2
1
4
1
0