Tico Pro-Spotter, Service Manual

Page: 91 / 211

PRO-SPOTTER TRANSMISSION
TICO Manufacturing
Service Manual 5-7
5. While still at normal operating temperatures, remove
the drain plug and allow fluid to drain completely.
6. Examine the transmission fluid for signs of dirt, water,
or debris.
For additional information, see the Allison Transmission®
operator’s manual.
Transmission Fluid Filling
See Figures 5-9 and 5-10.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
2. Replace the drain plug O-ring.
Figure 5-9: Drain Plug
3. Install the drain plug (1) and tighten to specification.
Figure 5-10: Dipstick
4. Clean any dirt or debris from the end of the fill tube
before removing the dipstick (2).
5. Remove dipstick.
6. Add fluid as necessary.
7. Periodically perform a manual cold check to verify the
transmission has adequate fluid for start-up and
operation. (See “Manual Check—Cold” on page 5-2.)
8. Inspect area for leaks before operating the tractor.
9. Operate tractor.
10. Inspect for leaks.
For additional information, see the Allison Transmission®
operator’s manual.
Specification
Transmission Fluid—Capacity
27.4 L
29 qt
1 Drain Plug
Specification
Drain Plug—Torque
25—32 N·m
18—24 lb·ft
1
TPS-073
2 Dipstick
Specification
Transmission Fluid—Capacity
27.4 L
29 qt
2
TPS-071