Ti Lite aero 2gx Owner'S Manual Download Page 64

Page: 64 / 109

7-8

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 7:

BACK UPHOLSTERY, SEAT UPHOLSTERY AND SEAT

CUSHIONS

2. Comfort: look for areas of irritation.

3. Position: if too high or too low, adjust anchor points.

4. Interference with other devices: relocate anchor points as necessary.

5. Move chair through full range of motion, including folding, and rolling. Check for any interference.

Maintenance

Check periodically for signs of wear in the stitching and webbing. If significant wear is found, contact your supplier for

qualified repair or replacement by TiLite.

Quick-Release Solid Seat Pan (

Aluminum

)

TiLite requires that your Quick-Release Solid Seat Pan be installed only by an authorized TiLite dealer.

Summary of Contents for aero 2gx














































































































Search results

Summary of Contents for aero 2gx

Reviews:

Related manuals for aero 2gx

Brands by name

Popular brands

Ti Lite aero 2gx, Owner'S Manual

Search results

Summary of Contents for aero 2gx

Reviews:

Related manuals for aero 2gx

Brands by name

Popular brands