manualshive.com logo in svg

Ti Lite aero 2gx, Owner'S Manual

Share
Download
Ti Lite aero 2gx Owner'S Manual Download Page 53

6-1

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 6: SIDE GUARDS

Cloth Side Guards

Removing/Replacing

1.   Lift up on the seat cushion and remove it from the chair.

2.   Separate the cloth side guards from the back upholstery and from the frame.  See Figure 6-1.

3.  If desired, install new cloth side guards onto the frame and back upholstery. 

 Note

: For Padded Nylon Back Upholstery, the fastening flaps that secure the cloth side guards to the back upholstery 

wrap around the outside of the back canes and attach to the outside of the back upholstery.  For Tension Adjustable 

by Strap Back Upholstery, the fastening flaps that secure the cloth side guards to the back upholstery wrap around the 

outside of the back canes and under the back upholstery flap.

4.  Replace the seat cushion. 

 

       

 

 

         

 

Figure 6-1

  Removing and Replacing

Cloth

Side 

Guard

Back 

Cane

Fastening

Flap

Back Upholstery

Flap

 

       

 

 

           

Rigid Removable and Quad Removable Side Guards 

(Aluminum and Carbon Fiber) 

Using Rigid Side Guards

To remove either type of rigid side guard, lift the side guard out of the side guard mount by grasping it at the top or place 

a finger in the hole and pull it upward.  See Figure 6-2.  To replace, place the bracket into the slot between the side guard 

mount and the clamp and push down.  

 

 

           

           Figure 6-2

     Rigid Side Guards

Clamp

Bracket

Side

Guard

Mount

Allen

Screws

Quad

Removable 

Side Guard

Rigid

Removable 

Side Guard

       

Summary of Contents for aero 2gx














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands