manualshive.com logo in svg

Ti Lite aero 2gx, Owner'S Manual

Share
Download
Ti Lite aero 2gx Owner'S Manual Download Page 49

5-3

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 5: ARMRESTS

             

Removable Desk Arm 

Removable Desk Arm

    

Figure 5-4

Desk Arm

Housing

Height 

Adjustment

Lever

Height 

Adjustment

Lever

Armrest

Armrest

Release 

Lever

Release 

Lever

Desk Arm

Housing

    

      

 

 

 

 

 

    Figure 5-5

Mounting Desk Arm

Desk Arm 

Housing

Release

Lever

Desk Arm 

Mount

 

Swing Away - Flip Back Armrest 

To flip back the armrest, raise the front of the armrest and rotate it straight back as far as possible.  Reverse this procedure 

to return the armrest to its original position.  See Figures 5-6 and 5-7.

To swing away the armrest, lightly lift up on the armrest and rotate the armrest away from the chair.  See Figures 5-6 and 

5-7.  To replace the armrest, swing it back towards the chair and gently push it back down into place.

Note: 

 The Swing Away Armrests pivot on nylon sleeves located inside the armrest receiver.  If the armrest does not rotate 

properly, check the sleeves for wear.

Summary of Contents for aero 2gx














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands