manualshive.com logo in svg

Thytronic SIF5600, Manual, Page: 89 / 96

Share
Download
Thytronic SIF5600 Manual Download Page 89

89

89

SIF5600 - Manual - 03 - 2008

                Framing: 
                              INT [ 1] tTR2  (1=10 ms)
                                       1,99 step 1
                                       100
                                       default: 20
                Dimension  : 1 register
                Synopsis     : class WREG -> ADR=16 (NUM=17), DIM=1

WREG NUM=18     Description : K3 configuration
                Framing: 
                              B32 [ 1] K3
                                       bit 0  Self test
                                       bit 1  PW break Blin1
                                       bit 2  CB fail
                                       bit 3  PW shorted
                                       bit 4  Start I>
                                       bit 5  Start I>>
                                       bit 6  Start IE>
                                       bit 7  Start IE>>
                                       bit 8  Trip I>
                                       bit 9  Trip I>>
                                       bit 10 Trip IE>
                                       bit 11 Trip IE>>
                                       bit 12 Open 52
                                       bit 13 Close 52
                                       bit 14 Self test 52
                                       default: 0x00000000
                              ENUM[ 3] K3 mode
                                       0  DeEn-NoLatch
                                       1  DeEn-Latch
                                       2  En-NoLatch
                                       3  En-Latch
                                       default: 0
                Dimension  : 3 registers
                Synopsis     : class WREG -> ADR=17 (NUM=18), DIM=3

WREG NUM=19     Description : K3 timer
                Framing: 
                              INT [ 1] tTR3  (1=10 ms)
                                       1,99 step 1
                                       100
                                       default: 20
                Dimension  : 1 register
                Synopsis     : class WREG -> ADR=18 (NUM=19), DIM=1

WREG NUM=20     Description : K4 configuration
                Framing: 
                              B32 [ 1] K4
                                       bit 0  Self test
                                       bit 1  PW break Blin1
                                       bit 2  CB fail
                                       bit 3  PW shorted
                                       bit 4  Start I>
                                       bit 5  Start I>>
                                       bit 6  Start IE>
                                       bit 7  Start IE>>
                                       bit 8  Trip I>
                                       bit 9  Trip I>>
                                       bit 10 Trip IE>
                                       bit 11 Trip IE>>
                                       bit 12 Open 52
                                       bit 13 Close 52
                                       bit 14 Self test 52
                                       default: 0x00000000
                              ENUM[ 3] K4 mode
                                       0  DeEn-NoLatch
                                       1  DeEn-Latch
                                       2  En-NoLatch
                                       3  En-Latch
                                       default: 0
                Dimension  : 3 registers
                Synopsis     : class WREG -> ADR=19 (NUM=20), DIM=3

WREG NUM=21     Description : K4 timer
                Framing: 

Summary of Contents for SIF5600

































































































Reviews:

No comments