manualshive.com logo in svg

Thytronic SIF5600, Manual, Page: 88 / 96

Share
Download
Thytronic SIF5600 Manual Download Page 88

88

88

SIF5600 - Manual - 03 - 2008

WREG NUM=13     Description : Measures reading
                Framing: 
                              ENUM[ 1] Reading
                                       0  Relative
                                       1  Direct
                                       default: 1
                Dimension  : 1 register
                Synopsis     : class WREG -> ADR=12 (NUM=13), DIM=1

WREG NUM=14     Description : K1 configuration
                Framing: 
                              B32 [ 1] K1
                                       bit 0  Self test
                                       bit 1  PW break Blin1
                                       bit 2  CB fail
                                       bit 3  PW shorted
                                       bit 4  Start I>
                                       bit 5  Start I>>
                                       bit 6  Start IE>
                                       bit 7  Start IE>>
                                       bit 8  Trip I>
                                       bit 9  Trip I>>
                                       bit 10 Trip IE>
                                       bit 11 Trip IE>>
                                       bit 12 Open 52
                                       bit 13 Close 52
                                       bit 14 Self test 52
                                       default: 0x00000000
                              ENUM[ 3] K1 mode
                                       0  DeEn-NoLatch
                                       1  DeEn-Latch
                                       2  En-NoLatch
                                       3  En-Latch
                                       default: 0
                Dimension  : 3 registers
                Synopsis     : class WREG -> ADR=13 (NUM=14), DIM=3

WREG NUM=15     Description : K1 timer
                Framing: 
                              INT [ 1] tTR1  (1=10 ms)
                                       1,99 step 1
                                       100
                                       default: 20
                Dimension  : 1 register
                Synopsis     : class WREG -> ADR=14 (NUM=15), DIM=1

WREG NUM=16     Description : K2 configuration
                Framing: 
                              B32 [ 1] K2
                                       bit 0  Self test
                                       bit 1  PW break Blin1
                                       bit 2  CB fail
                                       bit 3  PW shorted
                                       bit 4  Start I>
                                       bit 5  Start I>>
                                       bit 6  Start IE>
                                       bit 7  Start IE>>
                                       bit 8  Trip I>
                                       bit 9  Trip I>>
                                       bit 10 Trip IE>
                                       bit 11 Trip IE>>
                                       bit 12 Open 52
                                       bit 13 Close 52
                                       bit 14 Self test 52
                                       default: 0x00000000
                              ENUM[ 3] K2 mode
                                       0  DeEn-NoLatch
                                       1  DeEn-Latch
                                       2  En-NoLatch
                                       3  En-Latch
                                       default: 0
                Dimension  : 3 registers
                Synopsis     : class WREG -> ADR=15 (NUM=16), DIM=3

WREG NUM=17     Description : K2 timer

Summary of Contents for SIF5600

































































































Reviews:

No comments