![background image](http://html1.mh-extra.com/html/thyssenkrupp/drive-dab530/drive-dab530_operating-manual_1113962040.webp)
O
PERATING MANUAL
DAB530
M
AINTENANCE
/
SERVICE
ThyssenKrupp Aufzugswerke GmbH
3. Inspection of the brake actuating lever
It must be possible to
push the anchor rods coming up out of the two
brake magnets with your thumb
(see Fig. 7.4.2) and they must have
buffering, easy moving characteristics
when operation involves
jolting.
If a defect occurs with regard to points 2. or 3., in general both
accessory brake actuating levers are to be replaced!
The replacement is to be requested through ThyssenKrupp Aufzugswerke.
See replacement kit no. 6145 000 9220
7.5
Replacing brake shoes
Note:
With a remaining lining thickness less than or equal to
3 mm
, or if the
brake linings have become unusable and the required deceleration is not
achieved, the brake linings have to be replaced.
If the deceleration is not reached, the brake linings must be replaced.
In order to achieve the same braking effect after replacing the shoes, it is
necessary to measure and note down the setting of the initial spring tension
before removal
. See Fig. 7.3.2, dimension "A"
Fig. 7.4.2
Anchor rod
Brake magnet
40
Version 03/2017
Summary of Contents for Drive DAB530
