![background image](http://html1.mh-extra.com/html/thyssenkrupp/drive-dab530/drive-dab530_operating-manual_1113962043.webp)
O
PERATING MANUAL
DAB530
M
AINTENANCE
/
SERVICE
ThyssenKrupp Aufzugswerke GmbH
The brake adjustment for the DAB530 is to be carried out only with
one
effective brake shoe with the elevator car loaded with the rated load on a
descending run (full down) according to the values specified in the table
7.6.2.
Brake test
Brake shoe
Load
Deceleration
on
Q=100%
0.4-06
m/s²
two
Q=125%
1.2 m/s²
Before carrying out a brake test, check the braking distance, which
results from the above-mentioned deceleration.
Important:
In the case of repeated braking, the brake disc heats up, which
causes braking behaviour and setting values to change. It is therefore
recommended to have a sufficiently long cooling down phase between tests.
Caution:
When setting, the test switch screw must not touch the switch
contact, or only very lightly, because otherwise the switch will be damaged.
Note:
Brake test switches must be checked or readjusted after adjusting the
brake.
See chapter 7.7
Table 7.6.2
43
Version 03/2017
Summary of Contents for Drive DAB530
