![background image](http://html1.mh-extra.com/html/thyssenkrupp/drive-dab530/drive-dab530_operating-manual_1113962026.webp)
O
PERATING MANUAL
DAB530
M
OUNTING THE MACHINE
ThyssenKrupp Aufzugswerke GmbH
Adjusting:
the machine and base frame have been aligned at the plant and
fixed with spring-type straight pins. The location of the axles and/or the
distance cannot be changed.
The lateral location of the rope grooves can be set at the setting screws
beside the pulley shaft. Use the screws to set the desired groove offset, then
turn each screw back by ¼ revolution so that the mounting is free.
Note:
After completion of the installation work, the mounting bolts must be
tightened to the prescribed torque. See chapter 9
5.3
Connecting the machine
Overview circuit diagram of DAB530
Standard version
Fig. 5.2
Fig. 5.1
4
2
3
1
1 Setting screws
2 Counter-roller
3 Counter roller axle
4 Axle bracket
5 Machine base frame
5
26
Version 03/2017
Summary of Contents for Drive DAB530
