USERS MANUAL MINI 60
D ONGGUAN T HUNDER L ASER E QUIPMENT C O.,LTD
S hatian To wn, S h atian Da dao, M intian
Tel :(86)769 826653
Do ngguan C i ty, G uangdong P r ovince, China
29
1. Y axis 17. Right side door
2. Hand valve Pneumatic Fitting 18. Laser switch
3. Laser head 19. PC connection port
4. Honey comb table 20. USB connection port(USB)
5. Top lid 21.Ethernet port
6. Left side up door 22. Main power switch
7. Left side door 23. LED lamp
8. Front door 24. Power supply socket
9. Front up door 25. Laser tube cover
10. Flap protection sensor 26. Exhaust hose
11. LCD panel 27. .Chiller supply socket
12. Key switch 28. Blow air port
13. Emergency stop switch 29. .Water In and Water Out
14. X axis 30. “No-Water protection” signal port
15. Indicated light 31. Rear door
16. Right side-up door
1. Y-axis
The motion system is that performs the mechanical movements in Y direction. The Y-axis
is visible in the working area.
2. Hand valve Pneumatic Fitting
It’s used for adjust that blow air amount.
3. Laser head
Laser beam and red dot pointer are all come out from the laser head.
4. Honey comb table
The honey comb plate sits on top of the blade bed and has indexing pins for alignment.