manualshive.com logo in svg

Thunder Laser MINI-60, Unified User'S Manual

Introducing Thunder Laser Mini-60, a powerful and compact laser cutter equipped with advanced features for precision cutting. Ensure seamless operation with the Unified User's Manual, available for free download from our website. Get started on your projects with ease and efficiency with the comprehensive manual.

Share
Download
background image

      

USERS MANUAL                  MINI 60 

w ww.thunderlaser.com

                            

D ONGGUAN T HUNDER L ASER E QUIPMENT C O.,LTD

 

t [email protected] 

      S hatian To wn, S h atian Da dao, M intian

 

Tel :(86)769 826653                          

Do ngguan C i ty, G uangdong P r ovince, China

 

38       

Type IP Address: 192.168.1.1 
And Type subnet mask: 255.255.255.0 
Then click OK. 
With this you have successfully created the prerequisites so that the machine and the PC can 
communicate via LAN. 
Now open your RDWorks from right bottom corner of the software, set up the Device by 
Setting>>Device --- Add a “Device---(IP:192.168.1.100)”. 

 

Now RDWorks communicates with your laser machine via LAN. 

 

 

 

 

Summary of Contents for MINI-60





































































Reviews:

No comments

Related manuals for MINI-60

Brands by name

Popular brands

Load more brands