USERS MANUAL MINI 60
D ONGGUAN T HUNDER L ASER E QUIPMENT C O.,LTD
S hatian To wn, S h atian Da dao, M intian
Tel :(86)769 826653
Do ngguan C i ty, G uangdong P r ovince, China
30
5. Top lid
If the Top flap is opened, no data is processed. When the protection cover is opened during
working, the motion system is stopped and the laser source is turned off. During processing
of commands the protection cover must only be opened after pressing the “Pause “button.
6. Left side up door
Open this door for cleaning the second reflective mirror or align that laser beam.
7. Left side door
There is an Ammeter, door sensor checking board etc. please open this door for checking
these parts, but must pay attention to the electric current.
8. Front door
For cleaning the waste after working. This door is locked by using two outside locks.
9. Front up door
Open this door to remove the honey comb table and it’s convenient to put that material on
working table.
This door is locked by using inside screws and outside locks.
10. Flap protection sensor
This is where Open flat protection exist. Laser will stop working once the cover is opened
during working.
11. LCD panel
You can control the X-axis, Y-axis and Z-axis manually by the display panel, it also shows
the working time, power, speed and the whole working time and affords many function
options (Please view this chapter 4.3 for detail).
12. Key switch
When the key switch is turned to the off position, the machine cannot be turned on: when
the key switch is turned to the on position, the machine can be turned on normally.
13. Emergency stop switch
Once there’s an accident happen (laser catch fire, laser out leakage) during working,
please turn off this switch immediately. It will be cut off the laser power and motion power
immediately.
14. X axis
The motion system is that performs the mechanical movements in X direction. The X-axis
is visible in the working area.
15. Indicate light
If laser machine is running a job or user starts it without closing door or water protection,
the signal lamp is in red light. The red light indicates the dangerous situation and user must
