USERS MANUAL MINI 60
D ONGGUAN T HUNDER L ASER E QUIPMENT C O.,LTD
S hatian To wn, S h atian Da dao, M intian
Tel :(86)769 826653
Do ngguan C i ty, G uangdong P r ovince, China
50
4.8 How to use the door sensor checking board
The door sensor checking board is an additional tool for laser machines.
It will control all sensors that we install on the machine.
This will increase the ease of use of your laser machine.
About door sensor checking board interface description
：
1:
24V DC Voltage Power Input
7:
spare interface of Signal Input
2:
Signal Input for door sensor of S5
8:
Signal Input for door sensor of
S3
3:
Spare interface of Signal Input
9:
Signal Input for door sensor of S2
4:
Signal Input for door sensor of S7
10:
Signal Input for door sensor
of
S1
5:
spare interface of Signal Input
11:
Signal Output,where signal to controller board
6:
“Maintenance” button
12:
Spare interface of Signal Output
Each interface has a LED light to indicate the status, the yellow light for interface of
signal input will be on while door sensor with same label is closed, once all doors with
sensors installed are closed, the red light for signal output will be on and then send the
signal to controller board.
