GLASSWARE SANITIZING APPLIANCE
User and maintenance manual
REV. 1
13
EN
GLI
SH
5.2. OPERATING INSTRUCTIONS
The appliance is simple to use; just follow the instructions listed below.
1) Open the manual valve on the cylinder;
2) Turn on the appliance by pressing the switch positioned on the side of the machine.
3) Take a glass and place it upside down on the rosette wheel;
4) Press down on the rosette wheel; shortly, the gas will flow out from the nozzle and, at the
same time, the logo will light up and illuminate the work area;
5) After the appropriate time has elapsed (see table above) lift the glass to cut off the gas supply;
at this point the glass is chilled, sanitized and ready to use;
6) If you wish to freeze the glass, simply repeat steps 4 and 5, above.
5.3. TROUBLESHOOTING
In the event that the appliance fails to function properly, first consult the checklist
below, as it could just be a minor problem that the user can resolve alone.
DANGER!
Never attempt to repair the appliance yourself.
Important
: should it become apparent that gas is leaking from the nozzle of the appliance even
when idle, stop use immediately and contact Thrill International to arrange for the appliance to
be sent to its laboratory in order to carry out any necessary maintenance and repairs.
FAULTS
POSSIBLE CAUSES/SOLUTIONS
The device does not work
Check that the battery is charged.
Check that the manual valve on the tank is open.
Presence of dry ice on the surface
of the glass
Manual valve partially open.
Humidity in the air.
No gas is released when pressing
glass on rosette wheel
Check that the tube between the appliance and the
cylinder is not crushed or flattened.
Gas cylinder empty
Splashes of liquid appear when gas
activated
Presence of liquid on the tray.
Dry out the drip tray.
Gas leakage from the machine
Stop using the machine
Pressing the glass
on the rosette wheel
Sanitized glass (step 4)
