GLASSWARE SANITIZING APPLIANCE
User and maintenance manual
REV. 1
11
EN
GLI
SH
See illustrations below:
5) If, when opening the valve, you can hear CO
2
escaping, close the valve, unscrew the
connection, check there is no dust or dirt between the two conical surfaces and following the
steps described above, re-screw the connector to the cylinder.
Before using the appliance, the battery charger and power adapter must be unplugged and
both stored in a safe place for subsequent reuse.
When the need arises to replace the CO
2
cylinder, turn off the gas supply from the cylinder and
run the machine on an empty cycle to relieve the gas pressure in the tube, before unscrewing
the connector. Then proceed with the connection of the full cylinder as described previously.
locking
junction
Open
gas flow
Close
gas flow
