manualshive.com logo in svg

Thrane&Thrane TT-3710A EXPLORER 500, User Manual

The Thrane&Thrane TT-3710A EXPLORER 500 is an exceptional communication device, offering seamless connectivity and unmatched reliability. Ensure smooth operation of this cutting-edge product by referring to the comprehensive User Manual. Download it for free from our website manualshive.com and unlock the full potential of your EXPLORER 500.

Share
Download
background image

TT 98-122274-Q

174

Glossary

Glossary

A

APN

Access Point Name. The Access Point Name is used by the EXPLORER 500 user to establish 
the connection to the required destination network.

 

B

BGAN

Broadband Global Area Network. A satellite network based on geostationary satellites, 
delivering data rates of up to 492 kbps to virtually any part of the earth, with full UMTS (3G) 
compatibility.

 

C

CE

Conformitée Européenne. This term signifies that a CE certified product conforms to European 
health, environmental, and safety regulations. In short, it makes the product legal to be sold 
in the European Union.

 

CID

Context IDentifier

 

D

DHCP

Dynamic Host Configuration Protocol. A protocol for assigning dynamic IP addresses to 
devices on a network. With dynamic addressing, a device can have a different IP address 
every time it connects to the network.

 

F

FCC

Federal Communications Commission. An independent United States government agency, 
directly responsible to Congress. FCC certification is normally required to make a product 
legal to be sold in the United States.

 

G

Geostationary

Placed in a fixed position relative to a point on the surface of the earth.

 

GMPCS

Global Mobile Personal Communications by Satellite. GMPCS is a personal communication 
system providing transnational, regional or global coverage from satellites.

 

Summary of Contents for TT-3710A EXPLORER 500

































































































































































































Reviews:

No comments

Related manuals for TT-3710A EXPLORER 500

National Instruments SCXI-1303 Operation And Calibration Manual preview
SCXI-1303
Brand: National Instruments Pages: 7
National Instruments SCB-100A Quick Start Manual preview
SCB-100A
Brand: National Instruments Pages: 8
Vectron POS ColorTouch User Manual preview
POS ColorTouch
Brand: Vectron Pages: 48
Gantner GAT Vending 6100 BA Installation, Configuration & Operation preview
GAT Vending 6100 BA
Brand: Gantner Pages: 48
Ingenico IMP3YYW User Manual preview
IMP3YYW
Brand: Ingenico Pages: 22
VeriFone VX805 CTLS Integration Manual preview
VX805 CTLS
Brand: VeriFone Pages: 4
Bosch rexroth IndraControl VAC 08.1 Operating Instructions Manual preview
rexroth IndraControl VAC 08.1
Brand: Bosch Pages: 40
Bosch Rexroth ctrlX I/O XI312204 Manual preview
Rexroth ctrlX I/O XI312204
Brand: Bosch Pages: 8
Hisense HK950 Service Manual preview
HK950
Brand: Hisense Pages: 18
First Data VeriFone VX 680 Quick Setup Manual preview
VeriFone VX 680
Brand: First Data Pages: 15
First Data Move5000 Quick Reference Manual preview
Move5000
Brand: First Data Pages: 7
First Data FD-30 PIN Pad Quick Setup Manual preview
FD-30 PIN Pad
Brand: First Data Pages: 4
Equitrac PageCounter Field Service Manual preview
PageCounter
Brand: Equitrac Pages: 126
Heartland WaveRider Installation Manual preview
WaveRider
Brand: Heartland Pages: 15
Heartland Dinerware PAX S920 Implementation Manual preview
Dinerware PAX S920
Brand: Heartland Pages: 16
Omron NB-series Practices Manual preview
NB-series
Brand: Omron Pages: 17
Spectrum XDS560v2 Installation Manual preview
XDS560v2
Brand: Spectrum Pages: 4
Gemalto CINTERION BGS2T At Command Set preview
CINTERION BGS2T
Brand: Gemalto Pages: 554

Brands by name

Popular brands

Load more brands