Chapter 3: Using the display and keypad
TT 98-122274-Q
35
Navigating the display and keypad
Navigating with the keypad
The PIN must be entered before you can access the menu system.
•
To access the menu system from the Main screen,
press
S
or
T
.
•
To move up and down in the current menu,
press
S
or
T
.
•
To select the current menu item or setting,
press
OK
.
•
To escape the current menu/setting
and return to the previous level, press
C
.
•
To see the hidden part of long text strings,
press
X
.
•
To move backwards in the menu system, or in long text strings,
press
W
.
•
To adjust settings,
press
S
and
T
.
Short-cuts
The following short-cuts are available in the menu system:
•
To exit the menu system,
press and hold
C
for one second. The display returns to the Main
screen.
•
To activate/deactivate Stealth mode,
Press
C
+
OK
. When stealth mode is activated, the display
shows
STEALTH ACTIVATED
for a moment; then all lights and sounds are turned off.
•
To turn Pointing sound on/off,
Press
S
or
T
from the pointing screen.
This action only applies to the current pointing session. To turn the sound on or off for all pointing
sessions, select
SETTINGS
>
AUDIO INDICATORS
>
POINTING
and select
ON
or
OFF
.
Note
In low temperatures the display may respond slowly when a key is pressed. At
temperatures close to -25°C/-13°F the display may even turn black for a moment, e.g.
when you are scrolling through a menu. After 1-2 seconds with no keypad activity the
display will be readable again.
Note
For Stealth mode to be available, it must be enabled in the EXPLORER 500. Refer to
Enabling or disabling stealth mode on page 41.
