manualshive.com logo in svg

Thrane&Thrane TT-3710A EXPLORER 500, User Manual

The Thrane&Thrane TT-3710A EXPLORER 500 is an exceptional communication device, offering seamless connectivity and unmatched reliability. Ensure smooth operation of this cutting-edge product by referring to the comprehensive User Manual. Download it for free from our website manualshive.com and unlock the full potential of your EXPLORER 500.

Share
Download
background image

TT 98-122274-Q

31

Chapter 3

Using the display and keypad

3

In this chapter

This chapter describes how to use the built-in display menu system of the EXPLORER 500. 

It contains an overview of the entire menu system followed by a description of each menu.
It also explains the symbols and messages that may appear in the display, and describes how to 
navigate using the keypad.

Menu overview

Main menu

The items of the main menu are:

•

MESSAGES

shows all incoming SMS messages and allows you to open or delete each message or delete 
all messages.

•

CONNECT

shows a list of the Streaming profiles that are defined and selected for the LAN interface using 
the web interface. The 

CONNECT

 menu allows you to start and stop data sessions with the 

listed Streaming profiles.

•

CALLS

shows missed, received and outgoing calls and data sessions.

•

SETTINGS

 

allows you to

• restart the pointing procedure, 

• set display backlight and contrast, 

• set audio indications on or off, 

• enable or disable each interface, 

• enable or disable stealth mode (a terminal mode where lights and sound are off), 

• set the power up mode, 

• set the language used in the display and the web interface, and 

• restore  settings.

•

PROPERTIES

 

shows:

• known and accepted Bluetooth devices, 

• GPS  status,

• terminal information (IP address, hardware and software numbers, IMEI number),

• mobile numbers

• Voice mail number, and

• a list of active alarms.

Summary of Contents for TT-3710A EXPLORER 500

































































































































































































Reviews:

No comments

Related manuals for TT-3710A EXPLORER 500

Partner C14-1E Quick Start Manual preview
C14-1E
Brand: Partner Pages: 2
Kaba 9420 MID User Manual preview
9420 MID
Brand: Kaba Pages: 42
Pax Technology PRIORITY A920 Reference Manual preview
PRIORITY A920
Brand: Pax Technology Pages: 59
Omron SRT2-PD16T Manual preview
SRT2-PD16T
Brand: Omron Pages: 6
Wincor Nixdorf BEETLE /XS User Manual preview
BEETLE /XS
Brand: Wincor Nixdorf Pages: 42
FAAC ParQube FC Use And Maintenance preview
ParQube FC
Brand: FAAC Pages: 36
FaceID F910 User Manual preview
F910
Brand: FaceID Pages: 36
Lector WisePad 3 Manual preview
WisePad 3
Brand: Lector Pages: 32
Doosan LIN-Q DTM-01 User Manual preview
LIN-Q DTM-01
Brand: Doosan Pages: 30
POSIFLEX HT-4600 Series Technical Manual preview
HT-4600 Series
Brand: POSIFLEX Pages: 68
XIEGU GSOC Operation Manual preview
GSOC
Brand: XIEGU Pages: 22
Magtek DynaPro 30056072 Installation And Operation Manual preview
DynaPro 30056072
Brand: Magtek Pages: 40
Rapyd INGENICO MOVE 3500 MOBILE Getting Started preview
INGENICO MOVE 3500 MOBILE
Brand: Rapyd Pages: 10
EBN Technology POS60-5B-C1G Service Manual preview
POS60-5B-C1G
Brand: EBN Technology Pages: 31
HappyOrNot Smiley Touch HONT1000 Assembly Manual preview
Smiley Touch HONT1000
Brand: HappyOrNot Pages: 12
Partner PT-5900 Service Manual preview
PT-5900
Brand: Partner Pages: 80
ZKTeco MB10-VL Quick Start Manual preview
MB10-VL
Brand: ZKTeco Pages: 10
Chase Ingenico ICT250 Manual preview
Ingenico ICT250
Brand: Chase Pages: 10

Brands by name

Popular brands

Load more brands