1.7 Connecting components
Temperature module TED8xxx / page 19
1.7.6 Connecting an LM335
The IC-temperature sensor LM335 is connected between pin 10, pin 11 (+) and pin 8
(-).
Figure 8
Connecting an LM335
1.7.7 Connecting a PT-100 or PT-1000 sensor (option PT or Kryo)
Figure 9
Connecting a PT-100 or PT-1000 sensor (option PT or Kryo)
Pin 3 and 4 of the D-Sub-Connector are the current source, Pin 10 and 11 are the
voltage-measurement input-pins for the 4-wire measurement setup.
One connector of the sensor has to be connected to pin 4 and 11 while the other
connector goes to pin 3 and 10.
Pin 3 is connected to common ground via a 10
Ω
resistor.
LM 335
-
+
10
11
8
4
11
10
3
PT-1000