2.2 Functions in the channel menu
Temperature module TED8xxx / page 31
2.2.2 Changing parameters
To set or change a numerical set parameter in the channel menu the respective line
is selected with the cursor:
Example: Twin is to be changed:
CH3 T
S
= 22.000 °C
TE on T
A
= 22.000 °C
Th lo Twin= 5.60 °C
CHANGE
After pressing the key (
CHANGE),
you can change the selected parameter with the
tuning knob. If the selected parameter is a switch parameter (i.e. the type of the
sensor) the function of the softkeys will change:
TOGGLE:SENSOR AD/TH
Pressing the right softkey will toggle the sensor type.
Pressing
will terminate the procedure.
NOTE
Some parameters can not be changed, as they are measurement values
(i.e. the TEC voltage) or may not be changed with the TEC switched on. In
these cases access is denied indicated by a long beep.
