2.1 Functions in the main menu
Temperature module TED8xxx / page 26
2 Operating the TED8xxx
#
Before switching on the TEC current please refer to chapter 1.6, "Pre-settings" on
page 13
NOTE
With modules of the TED8xxx series all settings are executed at once. It is
not necessary to confirm the set values.
2.1 Functions in the main menu
2.1.1 Display
The main menu shows the channel number, the main operating parameter and the
type of sensor of the TED8xxx module.
channel no.
Cursor
main parameter
type of sensor
CH1 T= +20.000°C AD
CH2
TUNE
With the module switched OFF the main parameter is the set temperature.
With the module switched ON (LED “ON” lights up on the front of the module) the
main parameter is the actual temperature.
NOTE
Even with a thermistor as temperature sensor the "temperature" is shown
in °C. If the thermistor is not calibrated, the displayed temperature may be
absolutely wrong.
