Hardware standard RS 232-C 17
_________________________________________________________________________________
_
_____________________________________________________________________________________________________
© 2012 Thorlabs
4 Communication with a PC
NOTE
The following operating elements are still working with the remote control
active: The key
, the LEDs SEL, ERR and ON and all potentiometers
at the modules themselves
4.1 Hardware standard RS 232-C
The RS232C interface complies to the IEEE1174 standard for programmable
instruments.
To use the implemented RS232C interface, first select this option in the setup menu.
PRO8000 SETUP
Interface: RS-
232C
IEEE Adr.: 10
CHANGE
Then select the desired baud rate (default is 19200 Bd).
PRO8000 SETUP
IEEE
Adr.
:
10
Baudrate : 19200
CHANGE
If you use an older PRO8 system it will have a female 9-pin D-SUB connector at the
rear panel. You must use then an 1:1 connection cable between PRO8 and PC.
