English
19
Press
OK
on this icon to move from a selected subdirectory to the next
directory.
Displays a folder. Press
OK
on this icon to open it.
Displays a file. Press
OK
on this icon to start playback in the preview mode.
Press
OK
again to play in full-screen mode.
Playback in preview mode
Press the
RED
Options
button to select files for playback or to delete selected files.
Use the
GREEN
Play Mode
button to set whether the file (s) should be repeated once or all or all.
Use the
BLUE
Switch
button to switch directly to music or photo mode.
Playback in Full Screen Mode
Use the
GREEN
Jump
key to jump to a specific time.
Press the
YELLOW
Hide
button to show or hide the Infobanner.
Use the
BLUE
Audio
button to change the audio language.
INFO
changes the playback mode, e.g. whether the file (s) should be repeated once, randomly, or all.
7.4.2 Music
In this menu only supported music files can be played back. Use the
pq
t
u
and
P +/P-
buttons to
navigate and select or press
OK
.
Essentially, the functions for playing music do not differ from the functions for playing movies. Only
for music, there is no playback in full-screen mode. Please read the chapter above to familiarize
yourself with the full functions.
7.4.3 Pictures
In this menu only supported image files can be shown.
The function for playing pictures/photos only differs slightly from the playback for music.
Here you can find the functions that are available for pictures or are different from the rest:
Playback in Full Screen Mode
As soon as you confirm a picture with
OK
, the slideshow is starting; depending which mode has been
selected. The multimedia buttons can be used as usual.
Press
MENU
or
to exit the function.
Playback in preview mode
Use the
GREEN
Play Mode
button to change how the images should be played.
Slide Time
This is where you can set how long it takes to go to the next image during
the slideshow, select
3
seconds,
5
seconds,
7
seconds, and
OFF
.
OFF
only
displays individual images.
Repeat Mode
You can set the
RepeatMode
mode, whether the images are to be repeated
Random
all
All
or not
Off
at all.
Press
MENU
or
to exit the menu.
7.5 Update
In this menu you can update the receiver via USB or OTA (= Over The Air /download via satellite).
Select the desired sub-menu using the
pq
buttons and press
OK
to continue.
7.5.1 USB Software Update
This function allows you to perform a software update using a USB storage device.
Download the appropriate software and update instructions from our website www.thomsonstb.net
and unzip them to your correctly formatted USB storage device. Load the file (s) into the main
directory of your USB device, then connect it to your receiver. Switch the receiver
ON
and wait until
the storage device is successfully detected.
1. Wait a few seconds (~ 10 sec.) until the receiver displays a message that new software is
available. If no message is displayed, please try another storage device!
2. Use the
t
u
buttons to select
OK
and press
OK
to perform the update.
3. The receiver now changes to the update mode. Please wait until the update is completed!
