English
7
Optional: Connect one end of a good quality Scart cable to the TV SCART of your receiver and the
other end to the SCART input of your TV set.
3.2 Optional connection via DiSEqC 1.0 switch for up to 4 LNBs
Fig. 7
Connect the LNBs of your fixed antenna to the desired inputs of a DiSEqC 1.0 switch using a good
quality coaxial cable and suitable ‘F-connectors'.
Connect the output or “to receiver” of the DiSEqC 1.0 switch to the SAT IN connector on your receiver
using a good quality coaxial cable and suitable ‘F-connectors'.
Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
3.3 Connection to the Internet for RSS feeds and weather forecasts
Fig. 8
To use RSS feeds and weather forecast, the receiver must be connected to the Internet. Connect the
Ethernet (RJ-45) connector at least with a class CAT5E cable to your router/switch/Extender or similar
applicable equipment, which provides access to the Internet.
3.4 Extended connections for the home entertainment
Fig. 9
Connecting to a Digital Audio Amplifier with S/PDIF
By connecting your receiver to a digital amplifier or home theatre system, you can enjoy the best
possible sound quality and multi-channel audio (depending on broadcast). Connect your Digital
Audio Amplifier or home theatre system with a suitable cinch cable to the S/PDIF connector on the
back of the receiver
Connecting to a digital audio amplifier and TV using HDMI
If you want to connect your home theater, amplifier or AV receiver using HDMI, connect one end of
a high-quality HDMI cable to the HDMI connector on your receiver and the other end to the HDMI
input on your digital audio device.
The HDMI output of the digital audio device is then connected to the TV with another high-quality
HDMI cable. Select the appropriate input on your digital audio device as well as on the TV to use high
quality audio and video signals.
4.0 STARTING UP FOR THE FIRST TIME
Ensure that your satellite signal is of good quality and that all connections are properly setup. In
case of difficulties or questions, please ask your local dealer or service hotline for assistance. It is
recommended to follow the
First Time Installation
gradually. It will guide you through the basic
installation and setup process. You can enjoy digital HD broadcasts within just a few minutes. To enjoy
the complete range of channels and to watch your preferred scrambled services, please register with
the enclosed registration form at ORF-DIGITAL-DIREKT.
If you have further questions about your registration, you can directly contact the ORF-DIGITAL-
Service-Hotline (0800 700 600). Please have your
Device-ID
(Gerätenummer) ready.
4.1 Language and Video Settings
After connecting your receiver for the first time, the
OSD Language
,
Aspect Ratio
,
Aspect Conversion
and
HDMI Resolution
menus will be shown. Change your language with
t
u
and use
pq
to select
the other settings. For these settings, you can also use
OK
to show a list of available settings. Adjust
the
Aspect Ratio
according to your TV (4:3 for an analogue CTV set and 16:9 for your new flat
screen/HD TV) and select the
Conversion
of your preference.
For
HDMI Resolution
the default setting
720p
is recommended, but many TVs already support higher
resolutions. Therefore, you can choose
1080p
.
