8
NOTE:
If you select an HDMI resolution which is not supported by your TV, the
receiver will switch to the previous setting automatically after ~10 sec. If
you can see the displayed message, please confirm the selected resolution
by pressing
OK
.
During any stage of the
First Time Installation
, you can press
BLUE
Next
to go to the next step or
YELLOW
Previous
to get back to the previous step.
4.2 Antenna Setup
This receiver is already adjusted for reception of Astra 19.2 satellite with the correct settings. Per
default it is setup for DiSEqC port 1, but you can use the setting as well if you are not connected to
any switch. You only need to change these settings if you are not connected to Astra 19.2 or this
satellite is not connected to port 1 of your DiSEqC switch. To adjust your antenna settings for the
Satellite
,
LNB Power
,
LNB Type
,
LNB Freq
,
DiSEqC 1.0
and
Transponder
correctly, use the
t
u
and
pq
buttons.
For user convenience which have a multi dish installation, the
Auto DiSEqC Scan
* function is
supported, which can be activated by pressing the
GREEN
button.
For further details and information about the settings, see chapter
7.1.1 Antenna Setup
.
In the First Time Installation, it is possible to adjust the settings for up to 4 satellite positions. To
proceed within the First Time Installation, use the
BLUE
Next
button to follow the steps.
* This new function can recognise available satellites in the persisting antenna installation. The predefined satellites are: Astra 19.2E,
Astra 23.5E, Astra 28.2E, HotBird 13.0E and Eutelsat 9.0E.
4.3 Channel list selection
In this menu, you can choose your channel list by pressing
pq
.
You can choose between
ORF List
,
simpliTV List
,
Family List
and
Young Spirit
, depending
on your preferences (an overview about the different channels can be found on our website
www.thomsonstb.net).
In the
ORF List
you can find mainly Austrian ORF HD channels, respectively the most popular and
preferred German and Austrian Free-To-Air TV channels in SD and HD.
The
simpliTV List
includes all ORF HD, Austrian private HD channels and those available with an
additional simpliTV SAT HD subscription. Additionally, it provides quick access to popular German and
international Free-to-Air channels. The
simpliTV List
will be maintained by the broadcaster. Individual
changes can be made if channels have been moved to favourite lists.
The
Family list
and
Young Spirit
provides a mixed selection of Austrian and German HD channels, but
in different sequences.
To continue with the first-time installation, press the
BLUE
Next
key.
4.4 Regional Channels
Use
pq
to decide which ORF2 HD channel should be placed at the 2nd position of the selected
channel list. Press
OK
to confirm.
After your regional channel is set, press the
BLUE
Next
button to finish the first-time installation. Your
receiver will execute the respective search and afterwards switches automatically to the 1st channel of
your selected list.
Details for a channel search can be found in the chapter
7.1.3 Channel search
.
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We understand that you eagerly anticipate enjoying your new HD receiver. We do, however,
recommend reading the full user manual to get the best performance of your THOMSON HD
receiver.
To switch your receiver ON or to Standby, use the
q
button on the remote control. Choose a channel
with
pq
or the
CH+/CH-
buttons. Alternatively, you can choose the channel number with the
0~9
buttons on the remote control or press
OK
in viewing mode to display the channel list. The volume
can be adjusted with
t
u
or the
VOL+/VOL-
buttons. The usage of
VOL+/VOL-
and
!
is possible
in ALL menus which present a TV picture in the background and can be additionally used in the
