10
LIST
:
Opens the satellite list selection in viewing and list mode in case there is
more than 1 satellite installed.
FAV
:
Displays the favourite list selection in both modes. Details about creating
favourite lists can be found in chapter
7.2.1 TV Channel Manager
.
To return to the original respectively to the previous channel list /mode use
TV/R
or
LIST
.
6.1.3 Using the CH+/CH- buttons
CH+
or
p
will switch to a higher channel.
CH-
or
q
will switch a lower channel.
6.1.4 Using the
9
button
In order to quickly switch between your most preferred channels, use
9
to view the list of
Recently
watched channels
. This list contains up to 30 recently watched channels. As this list is temporary it will
be recreated each time after you switch on your receiver. In the
Settings > System Settings
menu, the
Recent channel list
option can also be set to
Off
, in this case pressing the
9
button switches between
the 2 last watched channels.
6.2 Info Banner
Any time during viewing mode you can press the
INFO
button to get info about the current channel
and programme*.
In this state, it is possible to use
t
u
to display channel and programme information about other
channels without switching channels, but however in this mode you can also switch to the selected
channel by pressing
OK
. Press
INFO
twice to display detailed programme information of the current
or next programme. For the current programme information use
t
u
to change between the current
and next event information. In the respective programme information, you can use
P+/P-
to scroll if
applicable. If you press the button a third time, technical details of this channel will be displayed. The
technical information might help you in case of reception or similar problems to see if the channel
provides Audio/Video PIDs and if the signal is of sufficient quality and strength additionally you can
find the
Device-ID
(Gerätenummer) in this screen. Press
INFO
or
to close the information.
Settings for the display duration can be set in menu
7.3.2 System Settings
.
* Programme information are displayed in case of availability. Availability depends on the broadcast.
6.3 Selection of audio language
Some channels support a choice of different audio formats and/or languages. To select another
audio language, press
AUDIO
in the viewing mode. A list with the available audio languages will be
displayed. Press
pq
to select an audio language or mode and confirm with
OK
. It is also possible to
select another audio mode with
t
u
. To confirm your settings press
OK
to apply.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the
TEXT
button in viewing
mode and enter the page number of choice with the
0~9
buttons. You can use
pq
t
u
like
described on screen for selection and scrolling through Teletext pages. If you would like to change the
transparency of the Videotext, press
OK
. In this mode the usage of
VOL+/VOL-
and
!
is supported
as well. If subpages are available at the current page, use
t
u
to select and with
P+/P-
you can scroll
fast through the pages
+100/-100
. Press
or
TEXT
to quit.
6.5 Subtitles
Some channels support a choice of different DVB subtitle languages. Press the
SUB
button in viewing
mode to display a list of available subtitle languages. Use the
pq
buttons for selection and confirm
with
OK
. To leave this menu use
.
